Track & Linear Lighting Solutions

Begin with the task or display

A long table, counter or circulation route may suggest a linear form, but the length of the fixture is only one part of the choice. Review where the light falls, how it overlaps with neighbouring light and what people see from seated and standing positions.

Track lighting raises a related question: where does the focus need to move? In a display-led interior, discuss the positions, aiming and mounting arrangement before repeating fittings. The selected track and light modules need to be reviewed as a system, rather than treating every fixture with a similar appearance as interchangeable.

A continuous form needs a considered beam

Linear profiles, multi-cell optics and suspended linear lights can create different visual and lighting effects. An illuminated line is not automatically a wall-wash or a task-lighting solution. Compare the proposed optic with the surface, the working plane and the required visual comfort.

The supplied references show multi-cell linear optics and track-mounted glass pendants. The lighting arrangements explore a contemporary line and a coordinated system. These possibilities help discuss the relationship between physical form, light distribution and the room; exact system details follow the project selection.

Compare a track accent and a continuous line

Black cone track lights on the lower of two magnetic rails — Black cone on the lower rail.

Cone track accent

Choose a focused pool of light for a display or a feature surface. The cone fits the specified 48 V magnetic track and is listed at 20 W, 1,800 lm and Ø120 mm, with 15°, 24° or 36° optics.

Continuous white opal strip on the upper rail above a multi-cell module — Opal strip on the upper rail.

1 m opal linear module

Choose a continuous luminous face along a counter, worktop or circulation route. The 1,000 mm magnetic-track module is listed at 30 W and 2,700 lm, with a wide opal distribution. For longer runs, check the joins and how the light reads across them.

Both catalogue entries list 2700 K, 3000 K and 4000 K. The system lists DALI-2, 0–10 V and Zigbee options. Confirm the exact track, power supply and control configuration together.

Make room for the mounting and driver

Check ceiling conditions, suspension positions and the relationship to furniture, displays and other services. A recessed linear detail, a surface-mounted line and a suspended profile each call for a different conversation about available space, alignment and maintenance access.

Confirm the proposed lengths, joins, finish and driver location against the actual selected system. Where several modules or sections are involved, agree how the result should read across the whole run rather than choosing each part in isolation.

Coordinate scenes without assuming compatibility

A dimmable linear fitting or track light needs the right driver and controller combination. Review low-level behaviour, switching and the intended scenes with the automation vendor. A control protocol or a similar-looking connector is not enough to establish compatibility.

Enlighto connects the lighting selection with the room’s tasks, materials and atmosphere. Share the layout, ceiling information, desired changes in use and the proposed control approach. The lighting requirements can then be coordinated with the specialist responsible for the automation system.

Read the light in the space.

Optics & distribution

A fixture’s form and its light distribution describe different things. Compare where the beam reaches with where people sit, stand and move. Review the intended task, the surrounding surfaces and the visible brightness of the fitting together.

Colour & material

Colour temperature describes the appearance of the light; colour rendition concerns how materials appear under it. Compare the proposed source with the actual finishes and at the dimming levels intended for the room.

Comfort in use

Look at the fitting from the positions people will occupy. Review the task surface, background and any reflections together. These observations help connect the fitting with the complete lighting solution.

Keep the fitting and its detail together.

An individual adjustable spotlight shown close up — Aim, shielding and the view from the room.

Downlights & spotlights

A useful downlight or spotlight shortlist records the proposed fitting, optic, mounting detail and driver together. Compare the aperture, cut-out and ceiling clearance with the drawing, then review the beam and visible brightness from occupied positions. Keep the selected finish, colour specification and dimming combination with that record so later decisions refer to the same fitting.

Continuous lighting follows the wall and ceiling geometry — A lighting system that follows the space.

Small aperture. Full mounting detail.

A compact ceiling opening still needs space behind it. One recessed mounting detail uses a 35 mm cut-out, a 70 mm flange and a 65 mm depth. We resolve the selected fitting, driver access and ceiling build-up together, before the aperture is repeated across a commercial space.

Track & linear lighting

Enlighto provides slim 48 V magnetic track solutions with spot and diffuse lighting modules. We resolve the track, power supply, fittings and intended dimming together for the selected combination.

Review the proposed track or linear arrangement as a complete system. Record the compatible fittings and connections, profile or track dimensions, mounting method, driver location and intended control behaviour. For suspended or joined sections, include the relevant drawing. Confirm these details against the selected system’s documentation before repeating the arrangement across the space.

One small table lamp within a green material palette — A closer layer of light.

From specification to the space.

One focused 48 V track-light example combines 10 W input with 900 lm output and a choice of 15°, 24° or 36° optics. A narrow beam can concentrate attention on a display; a wider beam can cover a broader subject. Mounting height, aiming and the surrounding light decide which is useful.

Colour options: 2700 K, 3000 K or 4000 K, with CRI ≥90 for this example. Compare the chosen white and rendering with the actual materials.
Control options: DALI-2, 0–10 V and Zigbee are specified options for the system. Resolve the exact driver, module and control combination together.
System fit: A 48 V rating alone does not establish interchangeability. Check the track profile, module interface, power supply and connections as one selected system.

Decorative & pendant lighting

Bring the pendant’s dimensions, suspension detail, finish and light distribution into the room’s material review. Consider its relationship to furniture and seated sightlines alongside the supporting task and accent lighting. Record the proposed source, driver and dimming arrangement with the approved photograph or drawing so the decorative choice stays connected to the lighting solution.